Skip to content

3 Reasons Why DIY Has Become Easier

  • September 22, 2020January 18, 2021

DIY, or Do It Yourself, has been attempted by many householders in the past. Humans change their minds on a frequent basis, and therefore their wall colors. Trends dictate our interiors. Television programs and the advertising in-between persuades us how our home should look. There are even programs devoted to giving homes a make-over, just as humans have one in a beauty salon. They show us how easy it can be to put up a shelf. One that does not require heavy bookends to stop all the books from falling off the end. This article will look at innovations over time that have encouraged us to attempt more and more jobs within the home. After all, dishwashers have meant that we no longer need to spend time washing up. Instead, we can devote more time to home improvements. As long as we have the appropriate tools and equipment, there is no reason why we can’t attempt some DIY jobs ourselves. To stock up on any DIY equipment, it might be worth visiting the Home Depot website to see if they have anything that you might need. If they do, people can always use some of the coupons on to potentially get some money off. With some good power tools, people should be able to do most DIY tasks.

Magnetic Screwdrivers

The earliest screwdrivers, as documented, were used during the late Middle Ages. They were likely to have been invented in either Germany or France in the late 15th century. A useful addition to this tool has been magnetization. This allows for screws to be held firmly on the screwdriver head and then not dropped and potentially lost. They are very useful when a self-construction kit comes with the right screws to use and then only enough to complete the job. Should you lose one, this could cause problems in the project’s final construction. The answer then is to have a screwdriver capable of holding the screws as you work with them. Or alternatively, a magnetic dish or screw tray that holds on to them. Glass jars or pots containing screws can be easily knocked over.

Just a cautionary note about magnetic screwdrivers. Although the magnetization on them is quite weak, it is still advisable to keep them away from PC components. So, use a non-magnetic screwdriver when working on circuitry and hard drives

Electric Drills

It might surprise you to know that it was in 1895 when C&E Fein, a German company, invented the electric drill, by combining the power of an electric motor with the manual drill. In 1889, two Melbourne residents, Arnot and his colleague William Blanch Brain, would then patent an electric drill. Those who have since benefited from this invention include not only today’s DIY enthusiasts but miners and builders, too. There is no doubt that electric drills speed up a job and save on the effort required when drilling into more labor-intensive surfaces such as brick walls. With that in mind, masonry bits should always be used.

The twist drill bit was created by Steven A. Mores from East Bridgewater, Massachusetts in 1861. Two grooves would be cut in opposite sides of what was essentially a round bar, which was then twisted, producing what are termed helical flutes. Drill bits were then, over time, cut differently to drill into different surfaces. What was once compatible with a manual drill can now be fitted onto an electric drill and used. Advancements in chuck technology has meant that Allen keys are not always required to fit drill bits. So, drilling a hole could not be simpler.


Plumbing no longer uses copper pipes which require solder joints, instead, plastic pipes can be fitted together with push-fit joints to form a watertight seal. These joints house barbs to grip the piping and are sealed with a rubber O-ring. They are easy and quick to install for the amateur and professional plumber alike. Whereas soldering is a skill that needs to be learned. If this practice is needed, then it is wise to contact a professional like Paul the Plumber. You can visit company website to see if they are available for you.

As far back as the 1930s, PVC-U, or unplasticized polyvinyl(chloride) pipes were used in sanitary drainage systems. During World War II, polyethylene (PE) was developed for use in cable protection in relation to radars. It would be used as an insulation for them. In addition, in the Netherlands, pressurized plastic piping systems were installed to drink water systems. In the 1940s, PVC pipes were also manufactured for drain waste vents when reconstructing Germany and Japan after World War II. So often have wars led to new technologies being invented. Not just to have the edge over the enemy but during periods of reconstruction afterward. DIY hobbyists can now make use of the plastic piping in that it makes it far easier to do the job yourself and end up with watertight joints. However, even the most prepared DIY-er can encounter problems with this so contacting your local plumbing company, like I Need The Plumber & Air Conditioning, might be necessary if you end up making some mistakes.

Where expert advice should be called upon without doubt is where gas boilers are concerned. They should be checked annually for safety by a qualified Gas Safe Register (formerly CORGI) certified gas engineer. The same goes for any electrical work. While some basics can be done through DIY, contacting one of the best electricians in Gloucester (or wherever is local to you) is a good idea because they can check over any wiring and make sure everything is safe.

In summing up, whether we think about the hand tools used or the materials needed to complete a job, there are aids and simpler methods that now exist to help us. This leaves us no excuse but to attempt the simpler jobs for ourselves.